RTA – CSD MT – Boxed, Stepping Motor Drive

Series of stepping motor drives with Modbus TCP/IP interface.
Drives optimized for coupling with SANYO DENKI stepping motors, fitted with encoder.
Compact system, developed to offer a wide variety of integrated functions and optimized for the most demanding motion control applications.

Introduction

Series of stepping motor drives with Modbus TCP/IP interface.
Drives optimized for coupling with SANYO DENKI stepping motors, fitted with encoder.
Compact system, developed to offer a wide variety of integrated functions and optimized for the most demanding motion control applications.

Highlights

Communication by means of Modbus TCP/IP interface.
Modes of operation: PP, PV and Homing.
Full digital microstepping drive.
Extremely compact size.
A highly sophisticated operation system, preserving anyhow the traditional ease of use of R.T.A. drives.
UL recognized.

Technical Specifications

Version: drive housed in a plastic box 130 x 106 x 32 mm, equipped with plug-in connectors.
Range of operating voltages: 24-48 VDC.
Nominal current.: 4 Amp.
Protections:
- Protection against under-voltage and over-voltage.
- Protection against a short-circuit at motor outputs.
- Overtemperature protection.
Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
Optoinsulated auxiliary and programmable inputs and outputs.
Warranty: 24 months.

Model Name	Drive Type	Bus Voltage Range (Volt.)	Phase Current Range (Amp.)	Dimensions (mm.)	Suggested Motors (Flange size)
CSD MT S4	Modbus TCP/IP	24 - 48 VDC	4.0	Box 130 x 106 x 32 mm Plug_in connectors	NEMA 11, NEMA 17, NEMA 23, 60 mm
CSD MT 94	Modbus TCP/IP	24 - 48 VDC	4.0	Box 130 x 106 x 32 mm Plug_in connectors	NEMA 11, NEMA 17, NEMA 23, 60 mm

Downloads

Catalogue

UL Listed

UKCA Certified