Wed 4th Sep 2024 - RTA X-PLUS S Stepper Drives with STO (Safe Torque Off) function from Micromech
RTA X-PLUS S stepping motor drive series with step and direction interface and direct mains input (110v AC to 230v AC)
The X-PLUS S series features an internal rectifier capable of transferring more than 330V DC to the motor.
Ideally suited to applications requiring high dynamic performance and high reliability.
Key Features:
- STO function (SIL3)
- Error detection monitor.
- Electronic damping facility to reduce noise and mechanical vibration at low and medium speed ranges.
- Optoinsulated and differential input/output signals provide easy interfacing with many commonly used control systems and ensure a high level of noise immunity.
- For NEMA 34 or larger stepping motors rated for high voltage.
Technical Specifications
- Possibility to switch off motor current by means of STO function.
- Range of operating voltages: 110-230 VAC.
- Range of current: 2.4-4.0 Amp. Setting up to four possible values by means of dip-switches.
- Microstepping: 400, 800, 1.600, 3.200 steps /revolution. Setting by means of dip-switches.
- Automatic current reduction at motor standstill.
- Protections:
- Protection against under-voltage and over-voltage.
- Protection against a short-circuit at motor outputs.
- Overtemperature protection.
- Electronic damping facility for further acoustic noise and mechanic vibrations reduction.
- Available in boxed version with plug-in connectors.
- Maximum compactness.
- Optoinsulated inputs to ensure best EM noise immunity.
- External fans not needed.
- Coupling with stepping motors rated for high voltage and equivalent or bigger than NEMA 34 is mandatory.
- Warranty: 24 months.
Disclaimer
The use of these images came with permission from RTA.
