RTA - CSD 94 - Boxed, Stepping Motor Drive

Stepping motor drive boxed CSD 94
( 24 - 48 VDC 2.6 - 4.4 Amp ) with Plug_in connectors 

Introduction

  • Series of ministep bipolar chopper drives, suitable for driving medium-low power two-phase stepping motors, with four, six or eight terminals.
  • Highly compact, easy to use and cost effective solution. This system is designed for easy mounting inside a metallic electrical cabinet.
  • Target: low power applications without special configuration requirement, but needing high precision, smoothness of movement and low acoustic noise.
HIGHLIGHTS
  • Microstepping function up to 3.200 step/rev.
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
  • Separated connectors for logic signals and power connections.
  • Pull-up and pull-down input signals ease interfacing with the most commonly used control systems.
TECHNICAL SPECIFICATIONS
  • Version: drive housed in a metallic box in 90 x 99 x 21 mm, equipped with plug-in connectors.
  • Range of operating voltages: 24-48 VDC.
  • Range of current: 2.6-4.4 Amp. Setting up to eight possible values by means of a dip-switches.
  • Microstepping: 400, 800, 1.600, 3.200 steps/revolution. Setting by means of a dip- switches.
  • Automatic current reduction at motor standstill.
  • Protections:
    -Protection against under-voltage and over-voltage.
    -Protection against a short-circuit at motor outputs.
    -Over temperature protection with thermal sensor.
  • Possibility to set Pull-UP or Pull-Down inputs.
  • Possibility to switch off motor current with an external logic signal.
  • High efficiency CHOPPER with MOSFET final stage output.
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction at low and medium speed.
  • Warranty: 24 months.

 

For help and advice on choosing the right
product call 01376 333333

Stepper Motor Drives
Call for best price

RTA - CSD 94