Mon 21st May 2018 - Yaskawa AC Drives now in stock at Micromech.

We are pleased to announce that as well as the Parker AC10 Drives, we now also hold stock of the Yaskawa J1000 Series and V1000 Series AC Drives.  

J1000 SeriesJ1000 Series Features:
  • Open loop V/f control
  • RoHS compliance
  • Dual rating: Normal Duty and Heavy Duty
  • Starting torque of 150% at 3 Hz
  • Side-by-side installation due to patented hybrid heatsink
  • Preferred parameter feature
  • "One-touch" copy function with verify with 5-digit LED keypad
  • Increased vibration resistance, from 20 Hz to 50 Hz (0.65G)
  • 1 in 10,000 failure rate
  • Swing PWM function to decrease noise at low carrier frequencies
  • Pre-maintenance function
  • Modbus communication
  • Reduction in mechanical parts to increase MTBF
  • Cooling fan replacement without tools
  • MTBF: 28 years
  • Short Circuit Current Rating (SCCR): 30kA rms symmetrical
  • Built-in dynamic braking transistor

V1000 Series Features:
  • Up to 30% smaller than the competition
  • Current vector control, open loop
  • RoHS compliance
  • On-line tuning
  • Induction motor (IM) or permanent magnet motor (PM) operation
  • Function Block Diagram (FBD) programming via DriveWorksEZ™
  • Side-by-side installation due to patented hybrid heatsink
  • Removable terminal block with parameter backup function*
  • One-touch" copy function with verify
  • Super-fast 2 ms scan cycle with dual CPU
  • EN954-1 Safety Cat. 3, Stop Cat. 0
  • Increased vibration resistance, from 20 Hz to 50 Hz (0.65G)
  • 1 in 10,000 failure rate
  • Swing PWM function to decrease noise at low carrier frequencies
  • Pre-maintenance function
  • Modbus communication
  • Cooling fan replacement without tools
  • MTBF: 28 years
  • Short Circuit Current Rating (SCCR): 30kA rms symmetrical
  • Common programming with all other Yaskawa drives
  • DriveWizard software available at no extra cost


Please visit our AC drive shop to purchase these inverter drives online. Many drives are in stock for next day delivery (order before 12pm).

For assistance specifying the optimum drive for your application or to check delivery of out stock products contact Micromech on 01376 333333 or Email sales@micromech.co.uk